Upravit stránku

Crude polyols for polyurethane system formulation

  • Technical information NOP 150

    Natural Oil Polyol NOP 150

    Natural Oil Polyol is typically used as a co-polyol in flexible foams and C.A.S.E. polyurethane applications. The level of NOP 150 is normally between 10 and 50% within the polyol mixture. The great advantage is the low viscosity of this polyol. NOP 150 acts as an environmentally friendly alternative to conventional polyether/ polyester polyols. The level of NOP within the polyol component is dependent on the formulation and therefore end users should carry out their own assessment of the viability of incorporating NOP within their polyurethane foam systems.

    NOP-150-TIepdf0,2 MB
  • Technical information NOP 250

    Natural Oil Polyol NOP250 is typically used as a co-polyol in flexible and rigid polyurethane foam applications. The level of NOP 250 is normally between 10 and 50% within the polyol mixture. The great advantage is the low viscosity of this polyol. NOP 250 acts as an environmentally friendly alternative to conventional polyether/ polyester polyols. The level of NOP within the polyol component is dependent on the formulation and therefore end users should carry out their own assessment of the viability of incorporating NOP within their polyurethane foam systems.

    NOP-250-TIepdf0,2 MB
  • Technical information NOP 330

    Natural Oil Polyol is typically used in Rigid Polyurethane Foam applications. It could be also used as the hardening additive in flexible foams formulations. The level of NOP 330 is normally between 10% and 60% within the polyol mixture. Its great advantage is the low viscosity. NOP 330 acts as an environmentally friendly alternative to conventional polyether/ polyester polyols. The level of NOP within the polyol component is dependent on the formulation and therefore end users should carry out their own assessment of the viability of incorporating NOP within their polyurethane foam systems.

    Typical Properties of Natural Oil Polyol

    Appearance                                  
    Clear Amber Liquid

    Molecular Weight                  

    810 g/ mol

    Water Content                    

    < 0,3 %

    Viscosity at 25 oC                  

    100- 180 mPa.s

    Specific Gravity                           

    0,97 +/- 0,015 g.cm-3

    Hydroxyl Value                   

    310- 350 mg KOH/ g

    Flash Point                          

    205 °C

    Chlorine content                  

    < 0,3 %

    Please note:
    Whilst every effort is made to ensure its accuracy, the data held on this sheet is meant for informational purposes only. See Safety Data sheet for safe-handling information.
    NOP-330-TIepdf79,1 kB